Paradyne SLV 9128 technical manual SNMP NMS Security, SNMP Traps, Configuration Option, Settings

SNMP NMS Security

Select SNMP NMS Security to configure access to the unit.

SNMP NMS Security

Configuration Option	Settings	Default in [Bold]
NMS IP Validation	Enable, [Disable]
Number of Managers	[1] –10
NMS n IP Address	001.000.000.000–223.255.255.255, [Clear]
Access Type	[Read], Read/Write

SNMP Traps

Select SNMP Traps to configure desired SNMP traps and dialing out when SNMP traps occur.

SNMP Traps

Configuration Option	Settings	Default in [Bold]
SNMP Traps	Enable, [Disable]
Number of Trap Managers	[1] – 6
NMS n IP Address	001.000.000.000–223.255.255.255, [Clear]
Initial Route Destination	[AutoRoute], Modem, COM, PVCname
General Traps	Disable, Warm, AuthFail, [Both]
Enterprise Specific Traps	Enable, [Disable]
Link Traps	Disable, Up, Down, [Both]
Link Traps Interfaces	Network, DSX-1, T1s, Ports, DBM, [All]
DLCI Traps on Interfaces	Network, Ports, [All]
RMON Traps	[Enable], Disable
Trap Dial-Out	Enable, [Disable]
Trap Disconnect	[Enable], Disable
Call Retry	Enable, [Disable]
Dial-Out Delay Time (Min)	1–10 [5]
Alternate Dial-Out Directory	[None], 1–5

16