VPOS

(OPS1200 Display and Keyboard Only)

Move the vertical cursor position

Format:

VPOS {value}

Group:

Character I/O

Units:

none

See also:

HPOS, OPEN

This command allows moving the cursor on the LCD screen in the vertical direction. The value is a number from 0 to 3. The lines on the LCD screen are numbered from top to bottom as 0, 1, 2, and 3.

Note that this command will only work if the OPS: device has been opened using the “OPEN” command.

The following example sets the cursor position to the third LCD screen line:

Usage example:

VPOS 2

Chapter 2, OPS1200 Firmware Command Set

17

Page 23
Image 23
Parker  Products OPS1200 user manual Vpos, Move the vertical cursor position, HPOS, Open