VM24 I/O Module
Information in this document is subject to change without notice and does not represent a commitment on the part of Parker Hannifin Corporation. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose other than the purchaser's personal use, without permission of Parker Hannifin Corporation.
VM24 is a trademark of Parker Hannifin Corporation.
Microsoft is a registered trademark and Windows is a trademark of Microsoft Corporation.
©Copyright 1997 by Parker Hannifin Corporation. All rights reserved.
Printed in the United States of America.
WARNING
The VM24 I/O Module sends and receives signals for controlling your system's electrical and mechanical components. Therefore, you should test your system for safety under all potential conditions. Failure to do so can result in damage to equipment and/or serious injury to personnel.
Technical Assistance: Contact your local ATC, or ...
North America
Parker Hannifin Corporation
Compumotor Division
5500 Business Park Drive
Rohnert Park, CA 94928
Telephone: (800)
Fax: (707)
BBS: (707)
FaxBack:
Internet: www.compumotor.com
Europe
Parker Hannifin plc Electromechanical Division - Digiplan 21 Balena Close
Poole, Dorset. BH17 7DX UK Telephone: +44(0)1202 69 9000 Fax: +44(0)1202 69 5750
Parker Hannifin GmbH & Co. KG
Electromechanical Division - Hauser
Telephone: +49 (0)781
Fax: +49 (0)781
Motion & Control
Product Feedback Welcome