1. Safety Rules

Safe Operation Practices for Ride-On Mowers

IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.

I. TRAINING

Read the instructions carefully. Be familiar with the con- trols and the proper use of the equipment.

Never allow children or people unfamiliar with the in- structions to use the lawnmower. Local regulations may restrict the age of the operator.

Never mow while people, especially children, or pets are nearby.

Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their property.

Do not carry passengers.

All drivers should seek and obtain professional and prac- tical instruction. Such instruction should emphasize:

-the need for care and concentration when working with ride-on machines;

-control of a ride-on machine sliding on a slope will not be regained by the application of the brake.

The main reasons for loss of control are:

a)insufficient wheel grip;

b)being driven too fast;

c)inadequate braking;

d)the type of machine is unsuitable for its task;

e)lack of awareness of the effect of ground conditions,especially slopes;

f)incorrect hitching and load distribution.

II. PREPARATION

To reduce the risk of fire - before use, when refueling and at the end of each mowing session - inspect and remove any debris buildup from the tractor, mower and behind al guards.

While mowing, always wear substantial footwear and long trousers. Do not operate the equipment when barefoot or wearing open sandals.

Thoroughly inspect the area where the equipment is to be used and remove all objects which may be thrown by the machine.

WARNING - Petrol is highly flammable.

-Store fuel in containers specifically designed for this purpose.

-Refuel outdoors only and do not smoke while refu- eling.

-Add fuel before starting the engine. Never remove the cap of the fuel tank or add petrol while the engine is running or when the engine is hot.

-If petrol is spilled, do not attempt to start the engine but move the machine away from the area of spillage and avoid creating any source of ignition until petrol vapors have dissipated.

-Replace all fuel tanks and container caps securely.

Replace faulty silencers.

Before using, always visually inspect to see that the blades, blade bolts and cutter assembly are not worn or damaged. Replace worn or damaged blades and bolts in sets to preserve balance.

On multi-bladed machines, take care as rotating one blade can cause other blades to rotate.

III.OPERATION

Do not operate the engine in a confined space where dangerous carbon monoxide fumes can collect.

Mow only in daylight or in good artificial light.

Before attempting to start the engine, disengage all blade attachment clutches and shift into neutral.

Do not use on slopes of more than 15°.

Remember there is no such thing as a “safe” slope. Travel on grass slopes requires particular care. To guard against overturning;

-do not stop or start suddenly when going up or down- hill;

-engage clutch slowly, always keep machine in gear, especially when traveling downhill;

-machine speeds should be kept low on slopes and during tight turns;

-stay alert for humps and hollows and other hidden hazards;

-never mow across the face of the slope, unless the lawnmower is designed for this purpose.

Use care when pulling loads or using heavy equipment.

-Use only approved drawbar hitch points.

-Limit loads to those you can safely control.

-Do not turn sharply. Use care when reversing.

-Use counterweight(s) or wheel weights when sug- gested in the instruction handbook.

Watch out for traffic when crossing or near roadways.

Stop the blades from rotating before crossing surfaces other than grass.

When using any attachments, never direct discharge of material toward bystanders nor allow anyone near the machine while in operation.

Never operate the lawnmower with defective guards, shields or without safety protective devices in place.

Do not change the engine governor settings or overspeed the engine. Operating the engine at excessive speed may increase the hazard of personal injury.

Before leaving the operator’s position:

-disengage the power take-off and lower the attach- ments;

-change into neutral and set the parking brake;

-stop the engine and remove the key.

Disengage drive to attachments, stop the engine, and disconnect the spark plug wire(s) or remove the ignition key

-before cleaning blockages or unclogging chute;

-before checking, cleaning or working on the lawn- mower;

-after striking a foreign object. Inspect the lawnmower for damage and make repairs before restarting and operating the equipment;

-if the machine starts to vibrate abnormally (check immediately).

Disengage drive to attachments when transporting or not in use.

3

Page 3
Image 3
Partner Tech P12597RB instruction manual Safety Rules, Training, II. Preparation, III. Operation

P12597RB specifications

The Partner Tech P12597RB is a cutting-edge point-of-sale (POS) terminal that has gained recognition in the retail and hospitality sectors due to its robust features and advanced technology. Designed to facilitate efficient transactions, this terminal combines an intuitive interface with powerful hardware, making it an ideal solution for businesses of all sizes.

One of the standout features of the P12597RB is its 15-inch resistive touchscreen. This display not only offers vivid visuals but is also designed for durability, capable of withstanding the rigors of a busy environment. The touchscreen functions seamlessly, providing staff with a responsive and user-friendly experience, allowing quick access to essential functions like inventory management, sales tracking, and reporting.

In terms of performance, the P12597RB is equipped with a reliable Intel Celeron processor, which ensures swift operation and multitasking capability. This allows businesses to run several applications simultaneously without any lag, significantly enhancing productivity during peak hours. The device also features an impressive memory specification, with options for RAM that enable faster data processing and smoother running of the POS software.

Connectivity is another key area where the P12597RB excels. It comes with multiple connectivity options, including USB, Ethernet, and serial ports, enabling seamless integration with various peripherals such as barcode scanners, receipt printers, and cash drawers. This flexibility ensures that businesses can tailor their POS setup according to specific operational needs.

Security is paramount in any POS system, and Partner Tech has prioritized this aspect in the design of the P12597RB. With built-in security features and compliance with PCI standards, the terminal ensures that sensitive customer data is protected during transactions. This helps build trust with customers and maintains the integrity of business operations.

Additionally, the P12597RB boasts a compact and stylish design, allowing it to fit into a variety of retail and hospitality environments without taking up excessive space. Its fanless design further contributes to its silent operation, making it an excellent choice for settings where noise could be a distraction.

In summary, the Partner Tech P12597RB is a sophisticated POS terminal equipped with a high-performance touchscreen, robust processing capabilities, extensive connectivity options, and essential security features. Its versatility and efficiency make it a valuable asset for any retail or hospitality business aiming to streamline operations and enhance customer service.