So the amplifier is sitting there unconnected.

Make sure that the rear panel power switch/breaker is off (down). Plug the AC cord into the back of the amplifier, and then into the wall. Then turn the power switch/breaker on (up). The lights in your house will dim for a moment as the power supply charges the capacitors.

If your amplifier uses a circuit breaker and not a fuse, please note that this circuit breaker is not a “safety device” or “emergency disconnect” for this product. It will provide current limiting which will protect the amplifier, but it does not provide personal shock protection in the manner of a ground-fault interrupter. One more reason why it is important not to defeat the Earth connection of your power cord.

On the front panel, the “Standby” LED indicator should be glowing blue, indicating that AC power is available and the capacitor banks are charged. If the “Power” LEDs are lighting the meter, use the front panel stand-by button to go to stand-by mode.

Now turn off the rear power switch and unplug the AC power cord from the wall while you connect the speakers and inputs.

Check to make certain that the loudspeaker cables aren’t shorted at the loudspeaker end, connect speaker cables to the output binding posts on the amplifiers, observing correct polarity. The output binding posts will accept either bare wire or spades. (Regulatory agencies in many countries have banned binding posts that will accept a banana plug, forcing us to abandon this option.) Make sure that your speaker wires only attach to the outputs of the amplifier, not to each other and never to the amplifier case.

Remember the warning about treating the output connections as ground, particularly if you are using a powered subwoofer with this amplifier. If you need a ground, use the one provided specifically on the rear panel of the amplifier.

The amplifier may be driven single-end or balanced, your choice. Single-ended input will always occur through the RCA connector and balanced input will always occur through the XLR connector.

Again, if you drive the amplifier single-ended then leave the supplied jumpers in place between pins 1 & 3 on the input XLR.

On the XLR connector pin 1 is ground, pin two is positive input and pin 3 is inverted (negative) input. Pin numbers are marked on the

XA30.5 Owner’s Manual

7

Page 6 Page 8
Page 7
Image 7
Pass Labs Amplifier, 5XA30.5 owner manual So the amplifier is sitting there unconnected
Page 6 Page 8

Amplifier, 5XA30.5 specifications

Pass Labs has long been synonymous with high-performance audio amplification, and their 5XA30.5 amplifier is a testament to their commitment to quality and engineering excellence. The 5XA30.5 is an exceptional Class A amplifier designed for audiophiles seeking purity in sound reproduction. One of its standout features is its power output; delivering 30 watts per channel into 8 ohms and a doubled output into 4 ohms, it provides ample power for driving a range of loudspeakers with ease.

One of the key technologies employed in the 5XA30.5 is its Class A circuitry. Unlike other amplification classes that switch on and off to produce sound, Class A amplifiers operate continuously, ensuring that the signal remains uncorrupted. This results in a rich, warm sound that faithfully represents the original recording. The design eliminates crossover distortion, a common issue in other classes of amplification, thus enabling the 5XA30.5 to deliver detailed and smooth audio performance, even at lower volumes.

The amplifier's robust construction further enhances its performance. With a fully balanced differential input stage, the 5XA30.5 minimizes noise and distortion, ensuring that the sound remains crisp and clear. The use of custom-designed output transistors offers superior linearity and thermal stability. Additionally, the generous power supply, equipped with a hefty transformer and ample capacitance, allows the amplifier to handle dynamic peaks without strain, preserving the integrity of the audio signal.

Another notable characteristic of the 5XA30.5 is its elegant design. The aesthetics include a minimalist chassis, machined aluminum front panel, and dual meters that provide real-time performance feedback, allowing audiophiles to observe the amplifier’s operation. Furthermore, it features both single-ended and balanced inputs, offering compatibility with a variety of source components.

Importantly, the 5XA30.5 embodies Pass Labs' philosophy of "the art of amplifier design," resulting in a product that not only performs exceptionally well but also maintains a timeless appeal. Whether for critical listening or enjoying music in a relaxed setting, the Pass Labs 5XA30.5 amplifier promises an unparalleled auditory experience, fulfilling the demands of even the most discerning audiophile. In a landscape where many amplifiers prioritize features over fidelity, the 5XA30.5 remains a beacon of true sound reproductions, demonstrating that exceptional quality and craftsmanship can coexist harmoniously.
Top Page Image Contents