Patton electronic 1180 Specifications, Responsivity Minimum 0.12 A/w, RS-232 Interface Standard

APPENDIX B

SPECIFICATIONS

Transmission Format: Asynchronous or synchronous

Range: 2.5 Km at all data rates, 5 Km at specified data rates

Data rates: 0 to 38.4 Kbps (async.); 2.4, 9.6, 19.2, 38.4, 56, 64, 192 and 256 Kbps (sync.)

Interface: EIA RS-232 / CCITT V.24

Transmit Mode: Single 62.5 or 50 µ core, multi-mode fiber cable

Clocking: Internal or external

Handshaking: Software (X-ON/X-OFF) or hardware (RTS/CTS), both modes available at all times

Application: Point-to-point

Typical Link Budget: 8 dB with 50 µ cable; 12 dB with 62.5 µ cable

Responsivity Minimum: 0.12 A/w

LED Indicators: TD, RD, RTS, CTS, Power, Test

Diagnostics: Local and remote loopback

Connectors: DB-25 female (RS-232), ST or SMA (fiber)

Dimensions: 4.127”w x 1.52”h x 5.0”l

Power Supply: Wall-mount, 10VAC, 700mA

APPENDIX C

RS-232 INTERFACE STANDARD

DIRECTION	STANDARD “DCE” SETTING		DIRECTION
		1- (FG) Frame Ground
		2- (TD) Transmit Data	To Model 1180
From Model 1180	Transmitting Timing - 15
		3- (RD) Receive Data	From Model 1180
		4- (RTS) Request to Send	To Model 1180
From Model 1180	Receiver Timing - 17
		5- (CTS) Clear to Send	From Model 1180
		6- (DSR) Data Set Ready	From Model 1180
		7- (SG) Signal Ground
To Model 1180	Data Term. Ready (DTR) - 20	8- (DCD) Data Carrier Detect	From Model 1180
To Model 1180	Transmitting Timing LXC - 24

15

16