3
1.0 WARRANTY INFORMATION
Patton Electronics
warrants all Model 2155 components to be free from
defects, and will—at our option—repair or replace the product should it
fail within one year from the first date of the shipment.
This warranty is limited to defects in workmanship or materials, and does
not cover customer damage, abuse or unauthorized modification. If this
product fails or does not performs as warranted, your sole recourse shall
be repair or replacement as described above. Under no condition shall
Patton Electronics
be liable for any damages incurred by the use of this
product. These damages include, but are not limited to, the following: lost
profits, lost savings and incidental or consequential damages arising
from the use of or inability to use this product.
Patton Electronics
spe-
cifically disclaims all other warranties, expressed or implied, and the
installation or use of this product shall be deemed an acceptance of
these terms by the user.
Note
Conformity documents of all Patton products can be viewed
online at
www.patton.com
under the appropriate product page.
1.1 RADIO AND TV INTERFERENCE
The Model 2155 generates and uses radio frequency energy, and if not
installed and used properly—that is, in strict accordance with the manu-
facturer’s instructions—may cause interference to radio and television
reception. The Model 2155 has been tested and found to comply with the
limits for a Class A computing device in accordance with specifications in
Subpart B of Part 15 of FCC rules, which are designed to provide rea-
sonable protection from such interference in a commercial installation.
However, there is no guarantee that interference will not occur in a partic-
ular installation. If the Model 2155 does cause interference to radio or
television reception, which can be determined by disconnecting the unit,
the user is encouraged to try to correct the interference by one or more
of the following measures: moving the computing equipment away from
the receiver, re-orienting the receiving antenna and/or plugging the
receiving equipment into a different AC outlet (such that the computing
equipment and receiver are on different branches).
1.2 CE NOTICE
The CE symbol on your Patton Electronics equipment indicates that it is
in compliance with the Electromagnetic Compatibility (EMC) directive
and the Low Voltage Directive (LVD) of the European Union (EU). A Cer-
tificate of Compliance is available by contacting Technical Support.