Patton electronic 2701/D, 2701/B Dip Switch Configuration, Close up of configuration switches

3.0 CONFIGURATION

The Model 2701 features configuration capability via hardware DIP switches. This section describes all possible DIP switch configurations of the Model 2701.

3.1 DIP SWITCH CONFIGURATION

The Model 2701 has two sets of internal DIP switches that allow configu- ration for a wide range of applications. The sets of switches are accessed from the underside of the 2701. Figure 1 shows the location of the DIP switches on the bottom of the printed circuit board.

Figure 1. Underside of Model 2701, Showing Location of DIP Switches

The Model 2701 DIP switches (Switch Sets 1–2) can be configured as either “ON” or “OFF”. Figure 2 shows the orientation of the DIP switches with respect to ON/OFF positions.

Figure 2. Close up of configuration switches

7