Contents
User Manual
Warranty Information
Table of Contents
Warranty Statement
Radio and TV Interference
FCC Information
Industry Canada Notice
FCC Part 68 Compliance Statement
Features
Service Information
CE Notice
General Information
Applications
S2 Summary Table
Switch S2-8 Reserved Switch S1
Switch S2-6 and S2-7 Clock Mode
Switch S1-1 RDL Type
Switch S1-2 Reserved
Switch S1-6 Through S1-8 Reserved
Switches S1-4 and S1-5 Line Build Out
Software Configuration
VT100
Helpful Hints
Introduction to Main Menu
Line Format ESF default Options ESF, D4, Unframed
System Configuration
DS0 Line Rate 64kbps default Options 64kbps, 56kbps
Line Coding B8ZS default Options AMI, B8ZS, B7ZS
Options Network, Internal, External
ESF Carrier Loops Enabled default Options Enabled, Disabled
Default Config Source Switch default Option EEPROM, Switch
54 Loops RDL Only Enabled default Options Enabled, Disabled
Local Loop Idle default
System Diagnostics
Remote Loop Idle default
Spacebar
Error Insertion Off default Options On, Off
Test Pattern Idle default Options Idle or Sending
Selected Pattern
NI Status
Current DIP Switch Settings
Error Counters
Valid Interval Count & Current Interval Time
Rx PRM
Loop Timeout
Password
Set to Default Configuration
Unit Information
Connecting the 10Base-T Ethernet Port to a Hub
Connecting the 10Base-T Ethernet Port to a PC DTE
T1/FT1 Interface Connection
T1 Link
LED Descriptions
10BT Link
Status
Operating Local Loopback LL
Loop V.54 & Telco Diagnostics
T1/FT1 CSU/DSU
Model 2720/I
Qrss
BIT Error Rate V.52 Diagnostics
Ethernet 10BASE-T Specifications
Patton NETLINK-T1 Model Specifications
RS-232 Control Port Signals at DB-9 Connecter
Signal Direction Tip Tx Data
Patton NETLINK-T1 Model Interface PIN Assignment
RJ-48C T1 DS0 Network Interface Female Modular Jack
