3.2.3 System Diagnostics

The System Diagnostics/Statistics screen looks like this:

NOTE: This screen is updated once per second.

The System Diagnostics/Statistics options and functions are described below.

aLocal Loop: Idle (default)

The Local Loop is a bi-lateral loopback in which the data from the local DTE and the data from the remote unit are looped back to their respective sources (See Section 5.3). Activate this loop to test the each of the DTE’s connection to the Model 2720.

The Local Loop test has four states:

Idle No user-controlled loopbacks are active.

LLThe Model 2720 is in local loopback mode.

Off The Model 2720 is in remote or CO initiated loopback mode or sending a pattern. Local loopback is disabled.

LocP The Model 2720 is in Local Loopback mode, and is send- ing a test pattern.

25

bRemote Loop Idle (default)

The Remote Digital Loopback (RDL) test checks the performance of both the local and remote Model 2720s, as well as the communica- tion link between them. Data from the local DTE is sent across the entire communication circuit and looped back to the local DTE.

The Model 2720 Initiating a RL can be in one of the following states:

Idle No user-controlled loopbacks are active.

TxPr The Model 2720 is sending the preparatory phase pattern lasting for approximately 2 -5 seconds.

WtAk The Model 2720 is waiting for an acknowledgement from the remote unit. If the remote unit does not respond, the WtAk message will remain on the screen.

RxAk The Model 2720 has received an acknowledgement from the remote unit.

Tout The Model 2720 is waiting before entering the Remote Loopback test mode.

TM The Model 2720 has successfully negotiated the Remote Loopback test and is in control of the remote unit. You may send a test pattern at this point by pressing:

c <spacebar>

TxTr The Model 2720 is sending a Terminate Loopback mes- sage to the remote unit. If the remote unit does not respond, the local unit will return to the Idle state.

Tx1s If the remote Model 2720 responds to the local NetLink- T1™’s terminate loopback request, the local unit then sends an all ones pattern before returning to the Idle state

TxP The Model 2720 is sending a test pattern while in Test Mode

IdlP The Model 2720 is sending a test pattern in place of data. The Model 2720 is not in test mode.

The Model 2720 receiving a RL can be in one of the following states:

26

Page 13 Page 15
Page 14
Image 14
Patton electronic 2720 user manual System Diagnostics, Local Loop Idle default, Remote Loop Idle default, Spacebar
Page 13 Page 15

2720 specifications

The Patton Electronics 2720 is a versatile and robust solution designed for various networking applications. It serves as a high-performance Ethernet over Copper (EoC) device, enabling the extension of Ethernet connectivity over existing copper lines. This product is particularly beneficial for businesses and organizations looking to enhance their network infrastructure without significant investment in new cabling.

One of the main features of the Patton 2720 is its ability to support multiple Ethernet standards, including 10/100/1000BASE-T. This flexibility allows users to seamlessly integrate the device into an existing network setup, accommodating both legacy and modern equipment. Additionally, the 2720 comes equipped with several Ethernet ports, providing multiple connection options and facilitating the integration of various network devices.

The Patton 2720 employs advanced technologies to ensure reliable performance. It features adaptive equalization, which optimizes the signal quality over copper lines, mitigating potential issues like attenuation and interference. This ensures that even in environments with challenging conditions, users can expect stable and efficient data transmission. Furthermore, the device supports Power over Ethernet (PoE), allowing network cables to deliver both power and data to connected devices, reducing the need for additional power supplies.

In terms of characteristics, the Patton 2720 is designed with a compact form factor, making it suitable for deployment in both residential and commercial settings. Its rugged construction ensures durability, making it capable of withstanding harsh environments. The device is also easy to install and configure, with user-friendly interfaces and management options that simplify setup procedures.

Additionally, the Patton 2720 provides comprehensive network management capabilities, including SNMP support, which allows for remote monitoring and management of the device. This makes it an ideal choice for network administrators seeking robust oversight of their network infrastructure.

In conclusion, the Patton Electronics 2720 stands out as a reliable and feature-rich Ethernet over Copper solution, ideal for businesses looking to optimize their network performance while minimizing costs. Its combination of advanced technologies, flexible connectivity options, and ease of use make it a compelling choice for a wide range of applications.
Top Page Image Contents