•The SmartNode contains no user serviceable parts. The equipment shall be returned to Patton Electronics for repairs, or repaired by qualified
WARNING service personnel.
•Mains Voltage: Do not open the case when the power cord is connected. For systems without a power switch, line voltages are present within the power supply when the power cord is con- nected. The mains outlet that is utilized to power the SmartNode router shall be within 10 feet (3 meters) of the device, shall be easily accessible, and protected by a circuit breaker
•The smartNode is not shipped with power cables. For AC powered units, ensure that the power cable used meets all applicable standards for the country in which it is to be installed, and that it is connected to a wall outlet which has earth ground.
•Hazardous network voltages are present in WAN ports regardless of whether power to the Smart- Node is ON or OFF. To avoid electric shock, use caution when near WAN ports. when detaching the cables, detach the end away from the Smart- Node first.
•Do not work on the system or connect or discon- nect cables during periods of lightning activity.
1.0 Power up the SmartNode
The terminal block header to which the wires are secured pro- vides the disconnect for the SmartNode. Take proper measures to ensure that it is not permanently fastened to the receptacle
CAUTION mounted on the chassis.
1.Connect the SmartNode to a power source using the included power supply and cable.
2.When the Power LED stops blinking and remains lit, the SmartNode is ready to configure.
2 | SmartNode 4520 and 4110 Quick Start Guide |
