Patton electronic 4110 Series configuration. Since you just downloaded a configuration file

5.0Download a configuration example, adapt it to your network, and load it onto the SmartNode

Patton provides a collection of configuration templates on the CD-ROM shipped with your SmartNode device—and also on the support page at www.patton.com/voip/appnotes.shtml. In most cases, one of these tem- plates should be similar to your application so that you can use it to speed up con- figuring the SmartNode. Simply download to your PC the configuration note that most closely matches your application. Adapt the configuration as described in the configuration note to your network (remember to modify the IP address) and copy the modified configuration to a TFTP server. The SmartNode can now load its configuration from this server.

Note Patton regularly adds new configuration templates to the collection at www.patton.com/voip/appnotes.shtml, so if you do not see your application on the CD-ROM, it may have been added to the website. In addi- tion, www.patton.com/voip/confignotes.shtml provides a library of configuration templates for popular SmartNode services and features.

Note If your application is unique and not covered by any of Patton’s configura- tion templates, you can manually configure the SmartNode instead of load- ing a configuration file template. In that case, refer to the SmartNode Series SmartWare Software Configuration Guide for information on con- figuring the SmartNode device.

In this example we assume an TFTP server resides on the host with the IP address

10.10.1.11and the configuration file named SN.cfg resides in the root directory of the TFTP server.

10.10.22.50(if-ip)[eth0]#copy tftp://10.10.1.11/SN.cfg startup- config

Download...100% 10.10.22.50(if-ip)[eth0]#

After you reboot the SmartNode the new startup configuration will become active.

When you issue the reload command, the SmartNode will ask if you want to copy the running configuration to the startup

configuration. Since you just downloaded a configuration file

IMPORTANT to the startup configuration you must answer this question with NO. Otherwise, the downloaded configuration will be over-

written and lost!

10.10.22.50(if-ip)[eth0]#reload

Running configuration has been changed.

Do you want to copy the 'running-config' to the 'startup-config'? Press 'yes' to store, 'no' to drop changes : no

Press 'yes' to restart, 'no' to cancel : yes The system is going down

SmartNode 4520 and 4110 Quick Start Guide 7