Patton electronic 1400, 4552, 1200 quick start Get Started, Login window

2.The subsequent pop-up window asks you for the login credentials (see figure 5). The factory default login credentials are:

User Name: administrator

Password: There is no password, leave this field empty

Figure 5. Login window

3.Click OK.

4.0 Get Started

After successful login you get to the SmartNode home page, and you can configure your device. You will be pre- sented the following home page, which contains buttons to store the current configuration state, reload the device and restore to factory defaults. The home page also shows some system information. You can always go back to the home page by clicking Home in the navigation bar.

SmartWare GUI Quick Start Guide 5