Patton electronic 4960 manual Console, Introduction

SmartNode 4960 Getting Started Guide C • Cabling

Introduction

This section provides information on the cables used to connect the SmartNode and the interface cards to the existing network infrastructure and to third party products.

Console

The SmartNode can be connected to a serial terminal over its serial console port, as depicted in figure 10.

The interconnecting cables shall be acceptable for external use and shall be rated for the proper application with respect to volt- age, current, anticipated temperature, flammability, and

CAUTION mechanical serviceability.

120-
240V,Power
50/60	Hz,	0/3
		1A

0/2

	0/1
T1/E1	0/0

ETH 0/1

ETH 0/0

Reset

Console RS-232

Serial Terminal

Note A Patton Model 16F-561 RJ45 to DB-9 adapter is included with each SmartNode 4960 Series device

Figure 10. Connecting a serial terminal

Note See section “Console port” on page 61 for console port pin-outs.

Introduction 56

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030