User Manual | Patton electronic NetLink-E1 2715 instruction

USER

Part# 07M2715-A

Doc# 086051UA

Revised 12/10/98

SALES OFFICE

(301)975-1000

(301)975-1007

An ISO-9001

http://www.patton.com

Certified Company

Image 1

Contents

User Manual Warranty Statement Patton Model Table of ContentsGeneral Information Radio and TV Interference Service InformationCE and Telecommunication Approvals Tel 301 Email support@patton.com General Product Description FeaturesSupported Applications 2715 as the Interface between the Telco and CPE Switch SET Summary Table DIP Switch ConfigurationSwitch SW1 Line Coding Line Coding Options CRC-4 MF MULTIFRAMEG.704Unframed G.703 SW3 SW4 Clock Modes Software Configuration Helpful Hints Introduction to Main Menu Line Format G.703 default Options G.703, G.704 System ConfigurationLine Coding HDB3 default CAS MF Setting Disabled default Options Enabled, Disabled CRC-4 Setting Disabled default Options Enabled, Disabled54 Loops Enabled default Options Enabled, Disabled Default Config Source Switch default Options EEPROM, Switch Local Loop Idle default System Diagnostics Test Pattern Idle default Options Idle or Sending Remote Loop Idle defaultError Insertion Off default Options On, Off Spacebar Password Current DIP Switch SettingsNI Status Unit Options Set to Default Configuration Loop TimeoutService Information DTE Interface Connection LED Descriptions Power ConnectionTXD RXD LOS Loop V.54 & Telco DiagnosticsALM ERR Error Insertion to on BIT Error Rate V.52 Diagnostics511 2047 Cable Recommendations Specifications DB9F Appendix C Power Supply Interface Connector, Terminal InterfaceJumper Position for Power via DC Power Jack default Jumper Position for Power via Pin KK