Patton electronic NetLink-E1 2715 user manual Patton Model Table of Contents, General Information

	PATTON MODEL 2715
	TABLE OF CONTENTS
Section		Page
1.0 General Information		2
1.1	Warranty Statement
1.2	Radio and TV Interference
1.3	CE and Telecommunication Approvals
1.4	Service Information
2.0	General Information	5

2.1Features

2.2General Product Description

2.3.1The 2715 as the Interface between the Telco and CPE

2.3.2The 2715 as a High-Speed Short Range Modem

2.3Supported Applications

3.0 Configuration 7

3.1DIP Switch Configuration

3.2Software Configuration

3.2.1Introduction to Main Menu

3.2.2System Configuration

3.2.3System Diagnostics

3.2.4Unit Options

4.0 Installation 26

4.1DTE Interface Connection

4.2Network Interface Connection

4.3Power Connection

4.3.1Using The AC Power Supply (100-240VAC)

4.3.2Supplying DC Power

4.3.3Supplying Power via pin KK

5.0 Operation 28

5.1LED Descriptions

5.2Loop (V.54 & Telco) Diagnostics

5.2.1Operating Local Loopback (LL)

5.2.2Operating Remote Digital Loopback (RDL)

5.3Bit Error Rate (V.52) Diagnostics

Appendix A - Specifications	33
Appendix B - Cable Recommendations	34
Appendix C - Factory Replacement Parts and Accessories	35
Appendix D - Interface Pin Assignments	36
Appendix E - Power Supply Interface	38
1

1.0 GENERAL INFORMATION

Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warrant- ed for One Year parts and labor. If any questions or problems arise during installation or use of this product, please do not hesitate to con- tact Patton Electronics Technical Services at (301) 975-1007.

1.1 WARRANTY STATEMENT

Patton Electronics warrants all Model 2715 components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment.This warran- ty is limited to defects in workmanship or materials, and does not cover customer damage, abuse, or unauthorized modification. This product contains no serviceable parts; therefore the user shall not attempt to modify the unit in any way. If this product fails or does not perform as warranted, your sole recourse shall be repair or replacement as described above. Under no condition shall Patton Electronics be liable for any damages incurred by the use of this product. These dam- ages include, but are not limited to, the following: lost profits, lost sav- ings and incidental or consequential damages arising from the use of or inability to use this product. Patton Electronics specifically dis- claims all other warranties, expressed or implied, and the installation or use of this product shall be deemed an acceptance of these terms by the user. In the event the user detects intermittent or continuous prod- uct malfunction due to nearby high power transmitting radio frequency equipment, the user is strongly advised to use only data cables with an external outer shield bonded to a metal or metalized connector.

2