Renegade 4 Printers with External Modules

To link a Renegade 4 printer (with an external RF link module) to a data collection terminal:

1.Turn the printer, terminal, and the RF link modules off.

2.Turn on the printer.

3.Wait for the printer's LED (near the trigger) to blink once.

4.Turn on the printer's RF link module. The green LED turns on.

5.Turn on the terminal's RF link module. The green LED turns on. Then, the LEDs on both modules start blinking.

6.Turn on the terminal.

10 RF link Operating Instructions

Page 10
Image 10
Paxar 7400 manual Renegade 4 Printers with External Modules