Printers

To install external RF link modules onto the printers:

1.Insert a 9-volt (PP3) battery in the module. See “Inserting Batteries” for more information.

2.Attach VELCROâ to the serial port sides of the printer and the external module. Place the VELCRO so the cable on the module can reach the serial port.

3.Using the VELCRO, attach the module to the printer. Note that on the Renegade 4 printer, you must place the module so the cable faces down. On the Rascal printer, place the module so the cable faces up.

9490 Printer

9450 Printer

4.Insert the cable from the module into the printer’s serial port.

6 RF link Operating Instructions

Page 6
Image 6
Paxar 7400 manual Printers