Paxar 9413, 9412 manual 16Configuring the Printer

Example {I,F,3,1,0,0,1 p }

Uses 9600 baud, an 8-bit word length, one stop bit, no parity, and the DTR mode.

D e f i n i n g t h e M e m o r y C o n f i g u r a t i o n P a c k e t

Use the memory configuration packet (M) to customize the size of your printer’s buffers, which gives you greater flexibility in your formats.

Memory must be allocated in 1/2K increments. The memory configuration packet does not accept decimals, so enter whole numbers. Multiply the amount to reallocate (in K) by 10. For example,

To reallocate (in K)

Enter this amount

1

10

1.5

15

2

20

2.5

25

32

320

153

1530

229.5

2295

Each buffer’s allocated memory remains in effect until that buffer is reallocated. For this reason, you may want to reallocate all the buffers when reallocating any buffer. If you reallocate more memory than you have available, you will receive an error.

Syntax	{I,M,buffer,device,buffer_size p }
M1. M	Memory Configuration Packet

3-16Configuring the Printer