Paxar 9430R Using Different Size Supply Rolls

Loading Supplies 2-3

Using Different Size Supply Rolls

The printer can use one, two, or three-inch wide supply

rolls. However, you need to order the supply guide

adapter if you are using one or two-inch wide supply.

Make sure the supply is left-justified inside the printer.

Insert the adapter into the left slot as shown.

Insert the adapter into the right slot as shown.

NOTE: The supply sensor is located on the left side by

the printhead.

Supply

Sensor

Supply

Sensor

Contents

Main hand-held portable table-top Page Page TABLE OF CONTENTS Page GETTING STARTED Operators Handbook Unpacking the Printer Programming Information Programmer's Manual Battery and Safety Information Installing the Battery Charging the Battery Using the AC Adapter Reading the LED This table explains the LED indicators. Programmers Manual Setting the DIP Switches Page Attaching the Belt Clip LOADING SUPPLIES Tearing Supply Using Different Size Supply Rolls For one-inch wide supply: For two-inch wide supply: Page USING THE PRINTER Printing Programmers Manual Using the Magnetic Stripe Reader Page CLEANING Page TROUBLESHOOTING Page Printing a Test Receipt Page SPECIFICATIONS A Printer Specifications Supply Specifications Ordering Supplies Options and Accessories Not for use with printers M09430R03, M09430R04, M09430R09, and M09430R10.