Paxar 9430R USING THE PRINTER

Using the Printer 3-1

USING THE PRINTER

This chapter includes information about printing and

using the magnetic stripe reader.

Printing

Before you print, make sure your printer’s battery is

charged and the printer’s communication values match

those of your host.

1. Connect the communication cable. See “Connecting

the Printer” in Chapter 1.

2. Turn on the printer.

3. Send a data stream to the printer. Refer to the

Programmer’s Manual

for more information.

4. Remove the printed receipts.

Using the Magnetic Stripe Reader

Read the following if your printer has the optional

magnetic stripe reader, which is factory installed.

The reader processes cards with a magnetic stripe, such

as a credit card or driver’s license and it requires special

software to be installed.

3

Contents

Main hand-held portable table-top Page Page TABLE OF CONTENTS Page GETTING STARTED Operators Handbook Unpacking the Printer Programming Information Programmer's Manual Battery and Safety Information Installing the Battery Charging the Battery Using the AC Adapter Reading the LED This table explains the LED indicators. Programmers Manual Setting the DIP Switches Page Attaching the Belt Clip LOADING SUPPLIES Tearing Supply Using Different Size Supply Rolls For one-inch wide supply: For two-inch wide supply: Page USING THE PRINTER Printing Programmers Manual Using the Magnetic Stripe Reader Page CLEANING Page TROUBLESHOOTING Page Printing a Test Receipt Page SPECIFICATIONS A Printer Specifications Supply Specifications Ordering Supplies Options and Accessories Not for use with printers M09430R03, M09430R04, M09430R09, and M09430R10.