Paxar 9462, 9465 over, over, under, Partially, Calibrate, Load Supply

3.Feed all four inches of the backing paper over the peel bar and under the applicator roller and the label deflector.

Applicator Roller

Peel Bar

4.Push the label deflector up until it snaps into place.

5.Partially close the cover to the first position.

6.Pull the backing paper over the guide roller, down to the pinch and feed rollers.

Guide Roller

(behind supply)

Feed Roller (behind Pinch Roller)

Pinch Roller

7.Hold the backing paper edge between the feed and pinch rollers and press the trigger.

8.Close the cover completely.

9.Select Load Supply from the printer icon menu, choose your supply type, and then select Calibrate.

R e m o v i n g S u p p l i e s i n P e e l M o d e

♦Tear the backing paper just above the pinch roller.

♦Open the supply cover completely.

♦Spread the supply holder tabs apart and remove the supply roll.

♦Carefully pull out the supply backing paper still in place between the pinch and feed rollers.

6