6.Place a roll of supply in the supply holder so it unrolls from the bottom.

7.Load the supplies for the printing mode you want: Peel or Non-Peel.

Loading for Non-Peel Mode

1.Feed the supply under the applicator roller and over the label deflector.

Applicator Roller

Label

Deflector

2.Close the supply cover.

3.Select Load Supply from the printer icon menu, choose your supply type, and then select Calibrate.

Loading for Peel Mode

1.Peel and discard the first four inches of labels from the backing paper.

2.Hold the printer upright and gently press down on the label deflector. It may be stiff.

Label Deflector

5