Top Panel

15

2

36

4

7

11

12

Inputs (1, 2)

The 6505 input block features HIGH [1] and NORMAL [2] GAIN inputs. The HIGH GAIN input has twice the gain of the NORMAL gain input and should be used when maximum overdrive is desired. When both inputs are used simultaneously, the 6505 automatically switches to the normal gain mode (6 dB pad). Situations where both inputs are used simultaneously (alternating between two guitars on stage using both inputs, etc.) should be avoided if peak overdrive is expected from the amp. Experimentation with your particular guitar/pickup into each input will determine which input is best for your sound.

Channel Select Switch (3)

This allows selection of the RHYTHM or LEAD channel. Depressing the switch to the “in” position activates the LEAD channel. The red LED light will illuminate to indicate that the LEAD channel is active. In the “out” position the RHYTHM channel is activated and the green LED illuminates. Channels may be remotely selected using the 6505 footswitch. If remote selection is desired, the channel select switch must be set to the “in” position (LEAD channel).

Rhythm Pre & Post Gain (4, 11)

The RHYTHM channel PRE [4] and POST GAIN [11] operate in the same manner as the LEAD channel gain controls. For most applications, the RHYTHM channel should be set up with the PRE GAIN at the lower, “cleaner” settings (0-4) and the POST GAIN set for overall volume. The RHYTHM channel can be converted to a second channel by activating the CRUNCH SWITCH [6].

Bright Switch (5)

Activates a preset boost in the treble frequencies (6 dB at 2 kHz) and affects only the rhythm channel.

Crunch Select Switch (6)

Boosts the gain of the rhythm channel to create a second “lead” channel. Depress to the “in” position to activate.

Lead Pre & Post Gain (7, 12)

The LEAD CHANNEL PRE GAIN [7] controls the input level and works with the LEAD CHANNEL POST GAIN [12] to determine the overall volume/overdrive of the LEAD Channel. Lower settings of the PRE GAIN control produce a relatively clean, undistorted sound while the middle to high settings produce harmonically rich distortion and screaming overdrive/sustain. Since both PRE and POST GAIN controls work in “combo,” a basic rule-of-thumb setup procedure is to begin with both controls in the lower settings (0-2). Using the PRE GAIN control, dial in the amount of overdrive/sustain you want for the LEAD channel. Then, with the POST GAIN control adjust for overall volume.

8

Page 7 Page 9
Page 8
Image 8
Peavey 6505TM owner manual Inputs 1, Channel Select Switch, Rhythm Pre & Post Gain 4, Bright Switch, Crunch Select Switch
Page 7 Page 9

6505TM specifications

The Peavey 6505TM is a revered amplifier head that has secured its place in the pantheon of high-performance guitar amplification. Primarily designed for heavy metal and rock guitarists, the 6505TM boasts a robust feature set and technology specifically tailored to deliver powerful, aggressive sounds that have made it a mainstay in studios and on stages worldwide.

One of the defining characteristics of the 6505TM is its two-channel design, allowing guitarists to switch between pristine clean tones and high-gain overdrive. The clean channel provides a sparkling, crystal-clear sound, perfect for chord strumming and clean leads. The lead channel, on the other hand, is where the 6505TM shines with its high-gain capabilities, offering exceptional sustain and aggression ideal for heavy riffs and solos. Both channels come equipped with independent EQ controls, giving users complete tonal control.

A key highlight of the 6505TM is its use of all-tube circuitry, featuring a combination of six 12AX7 preamp tubes and four 6L6 power tubes. This all-tube design plays a crucial role in producing warm, rich tones and adds significant dynamic range to the amplifier. The amp also includes Peavey's patented Resonance and Presence controls, allowing players to tailor the response and articulation of the amp to fit their specific playing style and musical genre.

Another notable feature is the built-in effects loop, which provides versatility for integrating external effects pedals or processors, further expanding the tonal possibilities. The amp also includes a footswitchable channel switching option, making it easy to transition between clean and high-gain sounds during live performances without interrupting the flow of the music.

The Peavey 6505TM is constructed with durable materials designed to withstand the rigors of touring and heavy gigging. The iconic aesthetic of the amplifier, with its steel chassis and rugged design, exudes reliability and professionalism.

In summary, the Peavey 6505TM is a powerful amplifier that offers high-quality tone and robust features for guitarists seeking exceptional performance. With its versatile channels, all-tube design, and integrated effects capabilities, the 6505TM remains a favorite among musicians pursuing intense soundscapes and dynamic tonal options.
Top Page Image Contents