Combo 115 Rear Panel

 

22

23

 

21

20

25

24

Combo 210TX Rear Panel

 

22

23

 

 

 

 

21

20

25

24

LINE CORD (120V PRODUCTS ONLY) (20)

For your safety, we have incorporated a 3-wire line (mains) cable with the proper grounding facilities. It is not advisable to remove the ground pin under any circum-

stances. If it is necessary to use the equipment without the proper grounding facilities, suitable grounding adapters should be used.

FUSE (21)

The fuse is located in the cap of the fuse holder. If the fuse should fail, IT MUST BE REPLACED WITH A FUSE OF THE SAME TYPE AND VALUE IN ORDER TO AVOID

DAMAGE TO THE EQUIPMENT AND TO PREVENT VOIDING THE WARRANTY. If the amp repeatedly blows fuses, it should be taken to a qualified service center for repair.

WARNING:

THE FUSE SHOULD ONLY BE REPLACED WHEN THE POWER CORD HAS BEEN DISCONNECTED FROM ITS POWER SOURCE.

GROUND POLARITY SWITCH (22)

The ground switch is a three-position rocker switch which, in most applications, should be operated in its center or zero position. There may be some situations when audible hum and/or noise will come from the speaker. If this situation arises, position the ground switch to either the positive or negative (+/-) position or until the noise is minimized.

6

Page 6
Image 6
Peavey 7/9780300698 manual Combo 115 Rear Panel Combo 210TX Rear Panel, Line Cord 120V Products only, Fuse