Peavey 7/9780300698 manual PRE-EQ Effects Patch Patch OUT, Crossover High Output, LOW Output

PRE-EQ EFFECTS PATCH

PATCH OUT:

Function:	Low-level pre-EQ effects send
Load impedance:	1K ohms or greater
Nominal output:	-10 dBV, 0.3 V RMS

PATCH IN:

Function: Low-level pre-EQ effects return

Impedance: High Z, 220K ohms

Designed input level: -10 dBV, 0.3 V RMS

(Switching jack provides patch OUT to patch IN connection when not used)

CROSSOVER HIGH OUTPUT:

Function:	High pass out
Load impedance:	1K ohms or greater
Nominal output:	0 dBV, 1 V RMS
Maximum output:	+20 dBV, 10 V RMS
LOW OUTPUT:
Function:	Low pass out
Load Impedance:	1K ohms or greater
Nominal output:	0 dBV, 1 V RMS
Maximum output:	+20 dBV, 10 V RMS
PREAMP OUTPUT:
Function:	Full-range output
Load Impedance:	1K ohms or greater
Nominal Output:	0 dBV, 1 V RMS
Maximum output:	+20 dBV, 10 V RMS
POWER AMP INPUT:
Impedance:	High Z, 22K ohms
Input Sensitivity:	1K ohms or greater
Nominal Output:	0 dBV, 1 V RMS

(Switching jack provides preamp OUT to power amp IN connection when not used)

SYSTEM HUM AND NOISE:

(At nominal input level 20 Hz to 20 kHz unweighted) 90 dB below rated power

EQUALIZATION (7-Band, 2 1/2 octave centers with shelving):

40 Hz, 100 Hz, 250 Hz, 625 Hz, 1.6 kHz, 4 kHz, 10 kHz...All +/- 15 dB Low: Active low-frequency control, +/- 15dB shelving type.

High: Active high-frequency control, +/- 15dB shelving type.

Bright: Special high-frequency contour, +8 dB

Contour: Special EQ curve

CROSSOVER (FOR BIAMP APPLICATIONS):

Range:	100 Hz to 1 kHz
Slope:	12 dB/octave

9