LINE (MAINS) CORD RETAINER (23)
The heatsink on the unit is designed to allow storage of the mains cable when not in use.
EXTERNAL SPEAKER JACK (24)
An external speaker cabinet may be connected to the amplifier. THE IMPEDANCE OF THE CABINET MUST NOT BE LOWER THAN 4 OHMS. Note that the external speaker jack is in parallel with the internal 4 ohm speaker to produce maximum power (300 watts) into the resultant 2 ohm load.
REMOTE SWITCH JACK (25)
A single switch footswitch (with 1/4" plug) can be used to turn the compressor on or off. Note that the footswitch will operate independently of the front panel switch.
7
