Peavey CC 1800, CC 4000, CC 2800 owner manual Specifications a

Rated Power Bridge 4 ohms Rated Power (2 x 2 ohms)

Rated Power (2 x 4 ohms) Rated Power (2 x 8 ohms)

Rated Power (1 x 2 ohms) Rated Power (1 x 4 ohms) Rated Power (1 x 8 ohms) Minimum Load Impedance Maximum RMS Voltage Swing Frequency Response

Power Bandwidth T.H.D. (2 x 2 ohms)

T.H.D. (2 x 4 ohms) T.H.D. (2 x 8 ohms)

Input CMRR

Voltage Gain Crosstalk Hum and Noise

Slew Rate

Damping Factor (8 ohms) Phase Response

Input Sensitivity (x40)

Input Impedance

Current Draw @ 1/8 power Current Draw @ 1/3 power Cooling

Controls Indicator LEDs Protection Connectors

Construction

Dimensions

Net Weight

Gross Weight

specifications a

2800

2,800 watts @ 1 kHz at <0.1% T.H.D.

1,400 watts per channel @ 1 kHz <0.05% T.H.D. both channels driven

965 watts per channel @ 1 kHz at <0.05% T.H.D. both channels driven

595 watts per channel @ 1 kHz at <0.05% T.H.D. both channels driven

1,850 watts @ 1 kHz at <0.1% T.H.D.

1,150 watts @ 1 kHz at <0.05% T.H.D.

665 watts @ 1 kHz at <0.05% T.H.D.

2 ohms

82 volts

10 Hz - 100 kHz; +0, -2.0 dB at 1 watt

10 Hz - 35 kHz; +0, -3 dB at rated 4 ohm power

<0.15 @ 1,150 watts per channel from 20 Hz to 20 kHz

<0.1% @ 880 watts per channel from 20 Hz to 20 kHz

<0.1% @ 560 watts per channel from 20 Hz to 20 kHz

> - 65 dB @ 1 kHz

x40 (32 dB) x20 (26 dB)

> -65 dB @ 1 kHz at rated power @ 8 ohms

> -111 dB, “A” weighted referenced to rated power @ 8 ohms

> 15V/us

> 500:1 @ 20 Hz - 1 kHz

+5 to - 15 degrees from 20 Hz to 20kHz

1.7 volts +/- 3% for 1 kHz, 4 ohm rated power, 1.36 volts +/- 3% for 1 kHz, 2 ohm rated power

15 k ohms, balanced

1,250 watts @ 2 ohms, 880 watts @ 4 ohms, 570 @ 8 ohms

2,905 watts @ 2 ohms, 2,220 watts @ 4 ohms, 1,355 watts @ 8 ohms

Two back panel temperature dependant variable speed 80 mm DC fans

2 front panel attenuators, rear panel Mode switches

2 ACL™ (automatic clip limiting), 2 Signal presence, 2 Active status, 2 Temp

Thermal, DC, turn-on bursts, subsonic, incorrect loads

Combi XLR & 6.3 mm phone input, Speakon and 5-way Binding Post speaker output, 15 amp

IEC mains connector

16 ga. steel with cast front panel

88.9 mm x 482.6 mm x 377.8 mm + 31.8 mm for rear support ears and connectors (3.5" x 19" x 14.875" + 1.25")

18.05 kg (39.8 lbs.)

19.23 kg (42.4 lbs.)

All power measurements made at 120 VAC, power transformer cold. 2 ohm power is time limited by magnetic circuit breaker.

p. 15