CENTURY SERIES

Optional Multi-Input Module

The left side of this double-module provides four stereo inputs which are summed together creating a stereo sub-mix. The right side takes that mix and processes it as a stereo source into the Vx. The right side (called Multi Master) is similar to a reg- ular Vx Stereo Input module, except that the Input Gain pot and switches are replaced by a mix trim stereo level control.

Panel controls (each of four identical inputs)

MIC input selector

for the L & R Input XLRs. The default (with the switch released) is Line Input sensitivity and gain.

+48V phantom power ON-OFF switch

for the input XLRs. Active only when MIC source selected.

PAD switch

for introducing 15dB attenuation between the XLRs and the preamp.

GAIN dual- concentric control pair

for the stereo preamp.

ON-OFF switch with indicator

for the preamp output to the stereo sub-mix.

L & R assign switches

for the preamp output to the stereo sub-mix.

For normal Stereo output release both switches. Use either L or R alone to send one side of the input to both sides of the mix. Select both switches for a mono mix of both inputs to the stereo mix.

SIGNAL indicators

for L & R audio, bi-color indication: normal level = green; overload = red.

PFL switches with indicators

for the L & R inputs.

Rear panel connections

Insrt Snd (Left/Right)

This balanced 1/4" TRS jack allows for the Left and Right multiple input module output signals to be sent to effects or signal processors.

Insrt Rtrn (Left/Right)

This balanced 1/4" TRS jack allows for the return of the effect- ed and/or processed signal back into the multiple input module.

Bal Input (L/R) A, B, C, D

These balanced XLR connectors accept input signals for the A, B, C, and D stereo inputs of the multiple input module.

VX

PAGE 17

Page 19
Image 19
Peavey Century Series owner manual Optional Multi-Input Module, Rear panel connections