Peavey manual Ecoustic E110, Preamp Section

ECOUSTIC® E110

SPECIFICATIONS

POWER AMPLIFIER SECTION: Rated Power & Load:

100W into 8 Ohms (internal with DDT compression)

Frequency Response:

+0, -3 dB, 20 Hz to 20 kHz @ 60W(rms) into 8 Ohms

Total Harmonic Distortion:

Less than 0.5%, 1W to 50W(rms), 20Hz to 20kHz, 8 Ohms

DDT Dynamic Range:

Greater than 20dB

DDT Maximum THD:

Below 0.5% THD for 6dB overload Below 1% THD for 20dB overload

Hum & Noise:

Greater than 90dB below rated power

Power Consumption:

150W, 60 Hz, 120 VAC (domestic) 150W, 50/60 Hz, 220-240 VAC (export)

PREAMP SECTION:

The following specs are measured

@1kHz with the controls preset as follows:

Channel 1 Gain @ 5

Graphic EQ Sliders @ 0 dB

Notch Filter @ 0dB

Channel 2 Gain @ 5

Low EQ @ 0 dB

High EQ @ 0 dB

All Effects Bypassed

Master Volume @ 5

Channel 1 -1/4" Input:

Impedance: High Z, 10M Ohms

Nominal Input Level: -8.40dBV, 380mV(rms)

Maximum Input Level: 3.52dBV, 1.50V(rms)

Channel 1 - XLR Input:

Impedance: Low Z, 8.2k Ohms

Nominal Input Level: -25.1dBV, 55.8mV(rms)

Maximum Input Level: -13.2dBV, 220mV(rms)

Channel 1 - Equalization:

Nine-band, Constant-Q Graphic EQ

Frequency Centers (Hz) at 63, 125, 250, 500, 1k, 2k, 4k, 8k, 16k

Available +/-15dB of boost/cut on each band

Channel 1 - Notch Filter:

Available 18dB of cut at 150Hz

Channel 2 - 1/4" Input:

Impedance: High Z, 10M Ohms

Nominal Input Level: -8.40dBV, 380mV(rms)

Maximum Input Level: 3.52dBV, 1.50V(rms)

Channel 2 - XLR Input:

Impedance: Low Z, 8.2k Ohms

Nominal Input Level: -25.1dBV, 55.8mV(rms)

Maximum Input Level: -13.2dBV, 220mV(rms)

Channel 2 - Equalization:

Low and High Shelving-type EQ

Corner Frequencies at 80Hz and 8kHz, respectively

Available +/-15dB of boost/cut on each

Balanced XLR Line Output (rear): Output Impedance: 150 Ohms

Nominal Output Level: 3.23dBV, 1.45V(rms)

Available Ground Lift capability

System Hum & Noise @ Nominal Input Level:

(20Hz to 20kHz un-weighted) Greater than 75dB below rated power

External Footswitch (not included): Peavey Part # 03582670

See manual text for functional details

Dimensions & Weight:

18.0” H x 20.7” W x 14.7” D (458mm H x 526mm W x 374mm D)

45.0 lbs (20.4kg)

16