Peavey E110 Piezo Switch Graphic Equalizer, Notch Filter Frequency Control, Channel III 1/4 Input

Session® 300 front panel

7PIEZO SWITCH

The Piezo switch is an EQ specifically voiced to remove the "brittleness" that can be present when using a Piezo pickup in an acoustic guitar. Consult your guitar owner's manual to determine the type of pickup pres- ent in your acoustic guitar.

8GRAPHIC EQUALIZER

These sliders provide precise tone control through the constant-Q, nine band equalizer. Each band may be boosted or cut 15 dB.

9NOTCH FILTER FREQUENCY CONTROL

This knob selects the frequency for the notch filter cut. The range is from 100 Hz to 2 kHz. This control features a Peavey patent, FLS or Feedback Locating System. There are LED's surrounding the knob which will light up as feedback is present. This allows the user to see a visual cue as to where the frequency of the feedback is centered and move the pointer of the knob to that location.

10

11

12

13

14

NOTCH FILTER CUT CONTROL

This knob controls the amount of notch for the frequency chosen via the Frequency Control (9).

DIGITAL EFFECTS SECTION

Includes digital reverb, chorus and delay. A complete description of this section is found on page 14.

CHANNEL VOLUME CONTROL

These knobs control the master volume of channels 1 and 2.

CHANNEL III 1/4" INPUT

1/4" Instrument Input.

CHANNEL III INPUT SWITCH

This switch selects which input jacks are being utilized for Channel III. There is a 1/4" input on the front panel and two RCA-type jacks on the rear panel for using outboard devices such as CD players, MP3 players, drum machines, etc. For the best performance and lowest noise, this switch should be set to the front 1/4" input when the RCA jacks are not being used.

15

16

CHANNEL III GAIN CONTROL

Controls the input level for Channel III.

CHANNEL III TONE CONTROL

Controls the tone of Channel III. Setting this control to "0" sets the EQ to flat. Turning clockwise progres- sively increases the bass and treble.

17HIGH FREQUENCY CONTROL

This knob controls the level of the ribbon high-frequency driver. Turning this knob clockwise will increase the level of the ribbon driver.

18CHANNEL BLEND CONTROL

This control pans between the Channel I and Channel II preamps. This control is beneficial when you have the sound of the preamps how you want them, but need to make fine adjustments to the balance between the channels. It is also very beneficial when using a guitar with both a Piezo and Mic output and you wish to blend the 2 signals.

19MASTER VOLUME CONTROL

Controls the overall volume of the amplifier.

18