Peavey FX Series manual Group Outputs, Left/Right Outputs, AUX 1 6 Outputs, Effects 2 Patch Jack

Rear Panel

53Group Outputs

These Group Outputs feature 1/4” TRS balanced jacks and provide output signal from the Groups. The output level is set by the Group Level faders (26).

54Left/Right Outputs

The Left/Right Outputs feature two 1⁄4” TRS Z-balanced jacks and two fully balanced XLR outputs. The 1⁄4” outputs can be used with Tip‚ Ring, Sleeve (TRS) balanced or Tip, Sleeve (TS) unbalanced connec- tors. The output level is set by the Master Level faders (40). Both outputs can be used simultaneously.

55AUX 1 - 6 Outputs

These AUX Outputs feature 1/4” TRS balanced jacks and provide signal from the Auxiliary Outputs. The output level is set by the AUX Level controls (19, 20).

56Effects 2 Patch Jack

This 1/4” TRS jack allows the internal Effects 2 processor to be patched to an Input or Group Insert or to an external device. The tip carries the input (return) signal to the compressor and the ring carries the output (send).

57EFX 2 Return Jacks

These 1/4” high-impedance balanced inputs can be used as stereo or individual returns. Designed for effects return, they can also be used as additional stereo inputs. The L/Mono input provides signal to both inputs if no connector is attached to the Right jack. The tip is the positive input for both balanced and unbalanced use.

58Media In Jacks

The Media Input jacks are set up for a +4 dBu input from a stereo audio media source. The signal feeds the Media In level control (34).

59Record Output Jacks

The output jacks can provide a +4 dBu output signal to a stereo recording device. The output level is controlled by the Record Output level control (36).

60USB Memory Connector

Use this A-type USB connector to plug in a removable data storage device to read or write MP3- formatted files.

61USB Computer Connector

Use this B-type USB connector to connect with a computer.

18