23
24
25
26.VOCAL ENHANCE: The circuitry of the vocal enhance has been designed to improve clarity and definition. The frequencies have been chosen to work well with speech and singing. The amount is determined by a concealed preset switch (MIN up, MAX down).
27.MONITOR CLIP/MUTE: Mutes the monitor output. The indicator will light when it is muted. The light also cautions that the monitor signal is within 2 dB of clipping, and channel send levels or the master monitor fader level should be reduced.
26 27 30
28. MONITOR MASTER FADER: Sets the overall level of the signal that is sent to the monitor output jacks. The headphone/meter select switch can be used to check the output level with the meter array.
29. MAIN LEFT AND RIGHT FADERS: These are the master left and right faders. If the main outputs are set to dual mono, both have the same signal (sum of left and right) and can be used as zone outputs for house and annex levels etc. These controls are best operated at the 0 (full up) position. It is most important that they be at 0 when channel gains are set, however they can be used to lower the overall sound level if needed.
30. CONFIGURATION: The main outputs can be configured as full stereo or as a mono sum of the left and right signals. When in dual mono mode, the left and right outputs become individual outputs, with their levels set independently by their master faders.
28
29
10
