Peavey operation manual XR 600G Front Panel, Quick SET-UP Guide

QUICK SET-UP GUIDE

1.Connect speakers to your XR600G. Route speaker cable for safety‚ taping down if necessary.

2.Be certain that all levels are down and your EQ is flat.

3.Connect all microphones and instruments. Turn on power to the XR600G and set master controls to the 12:00 position.

4.Use mode switch to select both power amplifiers for main speakers or one amplifier for mains and one amplifier for monitors.

5.Adjust channel level controls for proper volume mix. Engage pad switches if a channel distorts or if the channel becomes loud very quickly as its control is turned up.

6.Adjust graphic and channel EQ as needed.

7.Set and adjust the effects settings and channel send.

8.Now‚ play like you’ve never played before. Have fun!

XR 600G Front Panel

The standard channels (1–6) feature discrete‚ low-noise mic preamps with globally-switched phantom power and a 3-band EQ. Channels 1–4 offer balanced 1/4" line-level inputs and feature a full 25 dB pad switch to accommodate a wide range of input signals. Finally‚ channels (5–7) have dual input jacks (summed) for your tape‚ CD or synth input.

The master section features a DSP-based digital effects processor. This processor includes 16 presets‚ that provide a selection of effects designed to enhance your sound. There is also a parameter control that allows you to set the Time/Size of the effect.

5