XR600G · Hum and Noise:
Output | Residual Noise | Test Conditions |
| Ref: 4dBu |
|
Main | All controls down | |
| 1 channel nominal‚ Master nominal | |
| Master Fader Nominal‚ Channel Faders Nominal‚ Mic Inputs Terminated @ 150ohms | |
Monitor | All controls down | |
| 1 channel nominal‚ Master nominal | |
| Master Fader Nominal‚ Channel Faders Nominal‚ Mic Inputs Terminated @ 150ohms | |
|
|
|
(Hum and Noise measurements:
S/N Ratio:
>85dB below rated power output‚ Mic/Line to Speaker Output
Equivalent Input Noise (EIN):
Crosstalk:
>80dB Adjacent Input Channels
Common Mode Rejection Ratio (Mic Input):
50dB minimum
60dB typical @ 1kHz
XR600G · Power Amplifier Specifications:
Power Section: | DDT Dynamic Range: | Input Sensitivity: |
400 SC Module with DDT | Greater than 26dB | 1.225 V RMS for rated power output |
Power and Load: | DDT Maximum Distortion: | Input Impedance: |
210W RMS per channel into 4 ohms | Below 0.5% THD for 6dB overload | 11k ohms |
150W RMS per channel into 8 ohms | Below 1% THD for 20dB overload | Power Requirements: |
Frequency Response: | Hum and Noise: | DOM: 120VAC 60Hz 360W nominal |
95dB below rated power level (200w) | EXP: | |
power | Damping Factor: | 360W nominal |
Total Harmonic Distortion (THD): | Greater than 100 @ 1kHz‚ 4 ohms |
|
<0.02% @ rated output @ 1kHz |
|
|
|
|
|
XR600G · Product Weight and Dimensions:
Width: 19.125" | Height: 10.875" | Depth: 11.000" | Weight: 35.600 lbs |
|
|
|
|
15
