6
Great Plains Mfg., Inc.
Seed Box Agitator Option
See Figure 7:
6.Install two 12 tooth idler sprockets (10) in lo- cations shown, using 1/2 x 3 1/2 inch bolts (11), hex jam nuts (12), USS flat washers (13) and hex flange nuts (14).
See Figure 8:
7.Route chains as follows:
a.The 63 pitch chain around new 12 tooth sprocket (15) on gearbox to 22 tooth sprocket (16).
b.The 68 pitch chain around 17 tooth sprocket (17) near left side of frame to 35 tooth sprocket (18) on agitator shaft.
8.Adjust idlers to remove chain slack.
Figure 8
3P600 Chain Routing
Figure 7 | 18731 |
Idler Installation
18732
3/31/2004 |
