2
Great Plains Mfg., Inc.
Seed Box Agitator Option
See Figure 2:
2.Slide agitator shaft (5) into seed box from left side of drill.
3.As shaft advances, slide on parts in the fol- lowing order.
•35 tooth sprocket (6)
•bearing and flanges (7)
•lock collar (8)
•bearing and flanges (9)
•lock collar (10)
•bearing and flanges (11)
4.Attach bearings and flanges to divider (12) and inside of end panels (13 and 14) with 5/16 x 1 inch round head bolts, lock washers and hex nuts.
5.Slide lock collars (8 and 10) against bearing and flanges (7 and 11) and tighten set screws.
Figure 2 |
|
Agitator shaft Installation | 18727 |
3/31/2004 |