Peerless Industries 151-071M, 3P605NT installation instructions Manual Update, Before You Start

Great Plains Mfg., Inc.

Installation Instructions

6 Foot Drill

Seed Box Agitator Option

Used with:

•605NT

•3P605NT

•3P600

When you see this symbol, the subsequent instructions and

!warnings are serious - follow without exception. Your life and the lives of others depend on it!

General Information

These instructions explain how to install the agita- tor option. The agitator stirs the seed directly above the metering cups. It is intended to cut down on the "bridging" of light fluffy seeds.

These instructions apply to:

118-748A 3P600 Agitator w/Drive - 7-1/2"

118-749A 3P600 Agitator w/o Drive - 7-1/2"

118-750A 3P605NT & 605NT Agitator w/Drive

118-751A 3P605NT & 605NT Agitator w/o Drive

118-788A 3P600 Agitator w/Drive - 6"

118-789A 3P600 Agitator w/o Drive - 6"

Manual Update

Refer to the 6 foot drill operator’s manual for de- tailed information on safely operating, adjusting, troubleshooting and maintaining the agitator op- tion. Refer to the parts manual for part identification.

Drill Manual Part Numbers

151-061M 605NT & 3P605NT Operator’s

Manual

151-061P 605NT & 3P605NT Parts Manual

118-794M 3P600 Operator’s Manual

118-794P 3P600 Parts Manual

Assembly Instructions

Agitator Shaft

See Figure 1:

1.Remove covers (1) from inside both ends of seed box by removing bolt (2), lock washer (3) and hex nut (4).

Before You Start

Beginning on page 8 are detailed listings of parts included in the agitator option packages. Use the proper list to inventory parts received.

Definitions

Right-hand and left-hand as used in this manual are determined by facing the direction the ma- chine will travel while in use unless otherwise stated.

18726

Figure 1

Seed Box Cover Removal

© Copyright 2000 Printed 4/26/2000 151-071M