Peerless Industries ONE-TP-S, RTONES manual Gg Ff Aa, Aa Gg Ff, 7 of

Models: ONE-TP

1 33
Download 33 pages 25.67 Kb
Page 7
Image 7
GG

With tape measure, measure the outside to outside of the brackets on the back of your screen. If width of the tilt brackets on back of the screen is over 18-1/2" shown in figure 3.1, using a 7/16" wrench, attach wing bracket (GG) to center bracket using two 1/4" serrated flanged locknuts (FF) as shown in figure 3.2. If width of the brackets on back of the screen is over 30-3/8", using a 7/16" wrench, attach second wing bracket (GG) to center bracket using two 1/4" serrated flanged locknut (FF) as shown in figure 3.3.

CAUTION: If mounting to two studs on 16" centers, and using the three plate configuration, A STUD MUST BE SKIPPED in the middle so distance between studs is 32".

AA

18.5"

GG

FF

AA

fig. 3.1

fig. 3.2

fig. 3.1AA

GG

FF

fig. 3.3

7 of 33

ISSUED: 09-20-06 SHEET #: 202-9167-3 01-26-07

Page 7
Image 7
Peerless Industries ONE-TP-S, RTONES manual Gg Ff Aa, Aa Gg Ff, 7 of