Cable Management
fig. 8.1
8 | To make an opening to route cables through projector |
mount assembly, adjust projector mount assembly to full |
upward tilt position by turning knob for tilt adjustment as shown in figure 8.2. Left or right roll position can be adjusted if more space is required.
NOTE: Be certain tamper resistant screws are not engaged before making adjustments (see step 9).
Route cables through top of extension column as shown in figure 8.1 and figure 8.2.
NOTE: A method for assisting cables through extension
column may be required (example: string tied to connec- tor to help pull through extension column).
Route cables through projector mount assembly as shown in figure 8.2 and connect to projector.
CABLES WITH COMBINATION
OF VGA CONNECTOR
AND RCA PLUGS
BEND WIRES OF RCA
PLUGS IN OPPOSITE
DIRECTION
ROUTE
CONNECTOR THROUGH 
FIRST 
DO NOT
CRIMP
WIRES
NOTE: INNER DIAMETER OF EXTENSION COLUMN MAY NOT ALLOW PASSAGE FOR ALL CONNECTOR TYPES.
CABLE
CONNECTOR
INNER
DIAMETER OF
EXTENSION
COLUMN
fig. 8.2
EXTENSION
COLUMN
SCREWS FOR ROLL
ADJUSTMENT
OPENING FOR
ROUTING CABLES
SCREWS FOR PITCH
ADJUSTMENT
10 of 13 | ISSUED: |
Visit the Peerless Web Site at www.peerlessmounts.com | For customer care call |
