Peerless Industries PRS-1S, PRS-1W manual Attaching Adapter Plate to Projector, fig. 5.1 C, 8 of

Attaching Adapter Plate to Projector

CAUTION

•It is the responsibility of the installer to ensure that the projector is properly ventilated.

5Installing Dedicated PAP Series Adapter Plate (sold separately)

NOTE: The projector dedicated adapter plate you are installing may differ in appearance from the sample illustrated in figure 5.1.

Align shoulder of connection block (I) opposite notch of adapter plate. Attach dedicated adapter plate to connection block (I) using two #10-32 x 3/8" ser- rated washer head socket pin screws (C) as shown in figure 5.1.

NOTE: For PAP 35, PAP 40, and PAP 45 adapter plates, use two #10-32 x 3/4" screws provided with adapter plate in place of screws (C).

NOTE: Attach dedicated adapter plate to projector (see PAP instructions) before proceeding to step 6.

H

SHOULDER

NOTCH INDICATES

FRONT OF PROJECTOR

DEDICATED ADAPTER PLATE (SOLD SEPARATELY)

fig. 5.1 C

H

Installing PAP-UNV Adapter Plate (sold separately)

Align shoulder on connection block (I) opposite notch in adapter plate. Attach PAP-UNV adapter plate to connection block (I) using two #10-32 x 3/8" serrated washer head socket pin screws (C) as shown in figure 5.2.

NOTE: Attach PAP-UNV adapter plate to projector (see PAP-UNV instructions) before proceeding to step 6.

SHOULDER

NOTCH INDICATES

FRONT OF

PROJECTOR

PAP-UNV ADAPTER PLATE (SOLD SEPARATELY)

fig. 5.2 C

8 of 13 ISSUED: 08-15-07 SHEET #: 055-9188-6 06-25-10

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-865-2112 or 708-865-8870.