Peerless Industries PRS-1W, PRS-1S manual Installation to Threaded Rod

Installation to Threaded Rod

(Not evaluated by UL - Professional installation only)

4	Thread two 3/8-16 hex thin nylon-insert locknuts (not included) on two 3/8-16 threaded rods (not included) to the
	desired height of projector mount assembly. Attach projector mount assembly (A) to the two 3/8-16 threaded rods

using two 3/8-16 hex thin nylon-insert locknuts as shown in figure 4.1 or figure 4.2.

3/8 -16 THREADED ROD
(NOT INCLUDED)	3/8 -16 THREADED ROD
	(NOT INCLUDED)
	3/8 -16 HEX THIN
	NYLON-INSERT
3/8 -16 HEX THIN	LOCKNUT
	(NOT INCLUDED)
NYLON-INSERT
LOCKNUT
(NOT INCLUDED)

A A

FRONT OF

MOUNT

	3/8 -16 HEX THIN	3/8 -16 HEX THIN
		NYLON-INSERT
	NYLON-INSERT
		LOCKNUT
	LOCKNUT
		(NOT INCLUDED)
	(NOT INCLUDED)
fig. 4.1		fig. 4.2

FRONT OF MOUNT

7 of 13 ISSUED: 08-15-07 SHEET #: 055-9188-6 06-25-10

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-865-2112 or 708-865-8870.