Projector Alignment

9

To adjust yaw (swivel) for wood stud, concrete ceiling, and threaded rod mounting applications: Loosen

 

wood screws (F), or locknuts for threaded rods, until projector mount can be rotated. Rotate mount to desired posi-

tion and retighten screws or locknuts.

To adjust yaw (swivel) for extension column applications: Loosen screw on projector mount assembly (A) indi- cated below until projector mount can be rotated. Rotate mount to desired position and retighten screw.

To adjust pitch (forward and backward tilt): Loosen two screws on projector mount assembly (A) indicated be- low. Tilt mount to desired position and retighten screws.

To adjust roll (side to side tilt): Loosen two screws on projector mount assembly (A) indicated below. Tilt mount to desired position and retighten screws.

 

SCREW FOR SWIVEL STOP

 

A

SCREWS FOR PITCH

SCREWS FOR ROLL

ADJUSTMENT

ADJUSTMENT

11 of 13

ISSUED: 08-15-07 SHEET #: 055-9188-6 06-25-10

Visit the Peerless Web Site at www.peerlessmounts.com

For customer care call 1-800-865-2112 or 708-865-8870.

Page 11
Image 11
Peerless Industries PRS-1S, PRS-1W manual Projector Alignment