Installing and Removing Flat Panel Screen
4 | Hook screen onto wall plate (A) figure 4.1. Tighten |
M5 x 12 mm screws (D), shown in figure 4.2 and |
detail 1.
Note: For security models, use 4 mm security allen wrench (O) to tighten M5 x 12 mm screws (D).
To remove screen from mount, loosen screws (D) and lift screen off of mount.
WARNING
•Do not lift more weight than you can handle. Use additional man power or mechanical lifting equipment to safely handle placement of the screen.
•Failure to lock hook bracket with screws (D) can cause screen to come off mount if hit accidentally.
CAUTION
•Do not tighten screws with excessive force. Overtightening can cause damage to mount. Tighten screws to 20 in. • lb (2.26 N.M.) maximum torque.
B
A
D
fig. 4.2
SCREENA
fig. 4.1
A
B
D
DETAIL 1
8 of 8 | ISSUED: |
© 2005 Peerless Industries, Inc. All rights reserved. Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.