INSTRUCTIONS FOR USE

PRIMO VIAGGIO SIP with ADJUSTABLE BASE Primo Viaggio SIP with Adjustable Base is the child car seat certified for the 0+ age group, or children weighing 0-13 kg. (0-12/14 months).

Primo Viaggio SIP car seat has a Ganciomatic System that allows you to remove it from “Peg Perego” strollers or baby carriages with a flick of the hand, and attach and detach it on its base in the vehicle.

1• To detach the child car seat from its base, pull the handle behind the backrest upwards with one hand while lifting the seat with the other hand.

2• To attach the child car seat, line it up with the hooks and push downwards with both hands until the seat clicks into place.

SAFETY BELT

3• To fasten the safety belt, place one strap over the other, and insert them into the buckle on the leg divider, pressing until they click into place.

4• To unfasten the safety belt, press the red button on the leg divider buckle.

5• The safety belt straps and the Side Impact Protection headrest can be raised together to 5 different positions, to grow with the child.

Before adjusting the height of the safety belt and the headrest, release the tension on the straps.

To adjust the height of the safety belt and the

headrest, press the height adjustor button (located on the child seat backrest) while lifting or lowering the headrest to the desired position, making sure it clicks into place.

6• The correct position for the headrest is determined by the correct position of the safety belt straps. The childʼs shoulders should be just above the point where the straps pass.

7• To release the tension in the safety belt straps, slip your finger through the opening in the seat and press the metal button while using your other hand to pull the straps upwards, as shown in the

figure.

8• To fasten the straps with the child in the seat, pull the central adjustment belt towards you, as shown in the figure. Be careful not to pull the straps too tightly against the child; leave just a little play in the straps.

PADDING

9• To mount the shoulder padding, open the Velcro fastener and place the padding on the safety belt strap. Close the Velcro, with the opening turned outwards.

10• To mount the leg padding, slip the leg divider belt buckle through the padding, as shown in the figure.

11• The car seat comes with a filler cushion for newborn infants. Remove the filler after the child has grown bigger. To remove the filler cushion, slip it off the leg divider belt.

REGULATOR HANDLE

12• The car seat regulator handle has four positions. To incline the seat, press the two buttons on the handle and simultaneously adjust the seat until it clicks into the desired position.

Position A: Set the handle to this position when the child car seat is mounted in the car. Position B: Set the handle to this position when carrying the child car seat by hand or while attaching it to its base, to a stroller, or to a baby carriage.

Position C: Set the handle to this position to allow the car seat to rock.

Position D: Set the handle to this position to prevent the child car seat from rocking.

HOOD

13• To mount the hood, insert the fasteners into the openings on the child car seat and arrange the rear part of the hood behind the backrest.

14• To raise or lower the hood, push it backwards or forwards.

• ATTENTION: Never grab the hood to lift the seat!

Page 20
Image 20
Peg-Perego ECE R44, ECE R04 manual Instructions for USE, Safety Belt, Padding, Regulator Handle, Hood

ECE R44, ECE R04 specifications

The Peg-Perego ECE R04 and ECE R44 are advanced child safety car seats designed to provide optimal protection and comfort for infants and toddlers during car journeys. These models exhibit a host of features and technologies that cater to the diverse needs of families and reflect Peg-Perego's commitment to safety and quality.

One of the main characteristics of both models is their adherence to rigorous safety standards. The ECE R04 and ECE R44 certifications indicate that these seats have been tested and approved to meet stringent European safety regulations. This ensures that they offer superior protection in the event of a collision, giving parents peace of mind while on the road.

A standout feature of the Peg-Perego car seats is their innovative design, which includes a five-point harness system. This harness allows for secure seating and easy adjustments, accommodating the growing child. The seats also offer multiple reclining positions, providing comfort for sleeping infants and ensuring that they are properly positioned during travel.

The spacious interior of the seats caters to children of various sizes, ensuring an ergonomic fit. The padding is made from high-quality materials that provide cushioning and support, enhancing comfort during longer trips. Additionally, the covers are often removable and machine washable, making maintenance easy and straightforward.

Another noteworthy feature of the Peg-Perego ECE R04 and R44 models is their compatibility with the Peg-Perego travel systems. This system allows parents to seamlessly transition from car to stroller, making it convenient for daily activities. The easy installation process, which typically involves simple color-coded guides, further simplifies setup and ensures that parents can easily secure the seat.

In terms of technologies, Peg-Perego incorporates energy-absorbing materials designed to minimize the impact forces in the event of a collision. This thoughtful engineering reflects the brand's dedication to child safety.

Overall, the Peg-Perego ECE R04 and ECE R44 car seats combine safety, innovation, and comfort, making them excellent choices for families looking for reliable child safety solutions. With their thoughtful design, ease of use, and adherence to strict safety standards, these car seats continue to be a trusted option for parents seeking the best for their children on the road.