The hood will come off, and the seat will fall. 15• To remove the hood, press the buttons on the

fasteners while lifting the hood.

REMOVABLE LINING

16• To remove the lining from the headrest, slip the lining downwards, off the headrest frame and the safety belt straps.

17• To remove the lining from the car seat, unscrew the headrest frame, making sure to keep the screws.

18• Slip the sack fasteners out from under the seat, and slip the leg divider strap out.

INSTRUCTIONS FOR USE IN THE VEHICLE

IMPORTANT:

19•The Primo Viaggio SIP car seat is certified for use with the Adjustable Base or without it. Using the base in the vehicle guarantees greater safety. We recommend using the child seat in the vehicle without the base only as a last resort.

•The Primo Viaggio SIP car seat can be fastened to the front seat if the vehicle does not have an airbag, or to the back seat. It is unsafe and prohibited to fasten the child car seat using two-point abdominal vehicle seat belts. Use only a three-point seat belt to fasten the child car seat, as shown in the figure.

FASTENING THE BASE TO THE VEHICLE

20• Place the base for the child car seat on the seat of the vehicle. Since not all vehicle seats slope at the same angle, the height-adjustable base will allow you to keep the child car seat in the correct position, parallel to the ground.

•The position of the base is correct when the bubble on the gauge is completely visible.

•To adjust the base, use one hand to turn knob A, and the other hand to push down on point B to simulate the childʼs weight. Adjust the base so

that the bubble is completely visible in the gauge. 21• Slip the vehicle seat belt through the two side

slots on the base, as shown in the figure.

22• Fasten the buckle to the vehicle seat, as shown in the figure.

23• If your vehicle is equipped with a seat belt with a free-sliding buckle (like most modern vehicles), you must attach a Surefix Clip to it. Using a Surefix Clip guarantees correct attachment of the child car seat to the base.

•Remove the Surefix Clip from its housing, as shown in the figure.

24• Grab the vehicle shoulder strap (the free strap) just above the buckle, and hold it taut while slipping the Surefix Clip onto the free strap, as shown in the figure. The Surefix Clip must hold the strap taut. (Once the Surefix Clip has been mounted correctly, it can be left on the vehicle seat belt to make it easier to fasten the base each time).

25• After mounting the Surefix Clip, check the tilt of the base again. If the bubble is not completely visible in the gauge, turn the knob again to tighten the belt.

•The base is ready for fastening the child car seat to it.

FASTENING THE CHILD CAR SEAT TO THE BASE IN

THE VEHICLE

26• Place your child in the child car seat, and fasten the safety belt.

•The car seat must be positioned backwards, in relation to the direction of the vehicle.

•Fasten the car seat to the base, pressing with

both hands until it clicks into place.

27• With the child car seat mounted in the vehicle, the handle on the seat must be lowered all the way against the back of the vehicle seat, as shown

in the figure. Push the handle until it clicks into place.

28• Pass the vehicle seat belt around the backrest of the child seat.

29• Slip the vehicle seat belt through the slot on the

Page 20 Page 22
Page 21
Image 21
Peg-Perego ECE R04, ECE R44 manual Removable Lining, Instructions for USE in the Vehicle, Fastening the Base to the Vehicle
Page 20 Page 22

ECE R44, ECE R04 specifications

The Peg-Perego ECE R04 and ECE R44 are advanced child safety car seats designed to provide optimal protection and comfort for infants and toddlers during car journeys. These models exhibit a host of features and technologies that cater to the diverse needs of families and reflect Peg-Perego's commitment to safety and quality.

One of the main characteristics of both models is their adherence to rigorous safety standards. The ECE R04 and ECE R44 certifications indicate that these seats have been tested and approved to meet stringent European safety regulations. This ensures that they offer superior protection in the event of a collision, giving parents peace of mind while on the road.

A standout feature of the Peg-Perego car seats is their innovative design, which includes a five-point harness system. This harness allows for secure seating and easy adjustments, accommodating the growing child. The seats also offer multiple reclining positions, providing comfort for sleeping infants and ensuring that they are properly positioned during travel.

The spacious interior of the seats caters to children of various sizes, ensuring an ergonomic fit. The padding is made from high-quality materials that provide cushioning and support, enhancing comfort during longer trips. Additionally, the covers are often removable and machine washable, making maintenance easy and straightforward.

Another noteworthy feature of the Peg-Perego ECE R04 and R44 models is their compatibility with the Peg-Perego travel systems. This system allows parents to seamlessly transition from car to stroller, making it convenient for daily activities. The easy installation process, which typically involves simple color-coded guides, further simplifies setup and ensures that parents can easily secure the seat.

In terms of technologies, Peg-Perego incorporates energy-absorbing materials designed to minimize the impact forces in the event of a collision. This thoughtful engineering reflects the brand's dedication to child safety.

Overall, the Peg-Perego ECE R04 and ECE R44 car seats combine safety, innovation, and comfort, making them excellent choices for families looking for reliable child safety solutions. With their thoughtful design, ease of use, and adherence to strict safety standards, these car seats continue to be a trusted option for parents seeking the best for their children on the road.
Top Page Image Contents