Installing the Car Seat without the Base
Important! The base is designed to avoid consumer misuse by reducing the number of times the seat must be anchored to your vehicle. Please, use and install Primo Viaggio Sip ES 30•30 without the base only if needed.
Park the vehicle on level ground.
1• Position the restraint on the seat, so your baby is facing the rear of the vehicle. Adjust the handle so it rests at the top edge of the car seat as shown. Any other position may injure your baby in an accident. To move the handle, press the gray buttons on the sides of the handle at the same time and push the handle.
Important! The seat must be parallel to the ground. If necessary, use rolled towels or pool noodles under the seat at vehicle seat crease, so the red line on the side of the seat is parallel with the ground.
25
