Installing the Car Seat on the Base

Now that you have installed the base in your vehicle, you are ready to install the car seat on the base.

1• Holding the car seat by the handle, press it rear facing on the base until you hear the click. You will not be able to move the car seat if it

is properly locked in place. Check to make sure the base is still level. If not, remove the car seat and properly adjust the base.

Important! Newborn infants should be properly reclined. If the seat reclines too much, your baby can be ejected from the seat in an accident. If too upright, it can cause breathing problems.

PrimoViaggioSIP-ES_USA_30-30_FIU23 23

23

10-03-2010 14:44:56

Page 23
Image 23
Peg-Perego ES 30.30 owner manual Installing the Car Seat on the Base