Pelco 500 Series manual C2937M-A 5/07

Video 1, Video 2, S-Video, Component Mode Menu Field Definitions

Input: Select VIDEO 1, VIDEO 2, S-VIDEO, or COMPONENT.

Contrast: Adjusts black level of the video screen image (0 to 100).

Brightness: Adjusts white level of the video screen image (0 to 100).

Color: Adjusts the color saturation of the video signal (0 to 100).

Sharpness: Adjusts the picture softer or sharper (0 to 100).

Tint: Adjusts the range of color: green to red (-50 to +50).

3D Noise Reduction: Reduces the background noise of the video signal (NR ON or OFF).

Language: Select ENGLISH, SPANISH, GERMAN, FRENCH, or KOREAN for the OSD display. Disabled when RGB and DVI input is selected.

Panel Buttons: Select UNLOCK or LOCK. Locks/unlocks the buttons on the front panel.

PIP: Select SETUP for the picture-in-picture. Then select one of the following:

•PIP Input: Select VIDEO 1, VIDEO 2, S-VIDEO, or COMPONENT.

•PIP Location: Select the PIP position as T/L (top left), T/R (top right), B/R (bottom right), or B/L (bottom left).

•PIP Size: Select the PIP size as LARGE or SMALL.

•PIP Options: Select PIP, POP 4:3, POP 16:9, or PIP OFF. (POP 4:3 and POP 16:9 are available only when in component mode.)

•PIP Swap: Select SWAP to interchange Main with PIP by pressing the ENTER button twice.

NOTES:

•When using POP 16:9, one image will be 16:9 while the other will be a 4:3 aspect ratio.

•PIP and POP modes only work with certain inputs. For example, you cannot use a component or DVI subpicture with an RGB as the main picture.

Scan Mode: Select 16:9, 4:3, 14:9, or OVERSCAN. (Dimmed in Video mode.)

OSD Setting: Select SETUP for the on-screen display. Then select one of the following:

•OSD H.Position: Adjusts the OSD horizontal position (0 to 100).

•OSD V.Position: Adjusts the OSD vertical position (0 to 100).

•OSD Transparency: Adjusts the OSD transparency (0 to 100). The lower the number, the more transparent the menu will become over the background.

•OSD Display Time: Select 5 SEC, 10 SEC, 30 SEC, 60 SEC, or OFF.

Color Temperature: Select 6500 K, 9300 K, or USER. If you select USER, then select from the following calibrations:

•R-Gain:Adjusts gain for red (-50 to +50).

•G-Gain:Adjusts gain for green (-50 to +50).

•B-Gain:Adjusts gain for blue (-50 to +50).

•R-Offset:Adjusts the offset (or cut) for red (0 to100).

•G-Offset:Adjusts the offset (or cut) for green (0 to 100).

•B-Offset:Adjusts the offset (or cut) for blue (0 to 100).

•Reset: Select Restore to return to the original color temperature settings.

Default Setting: Select Restore to return to the default settings.

Information: Select Information to access Pelco headquarters information.

16 C2937M-A (5/07)