Pelco Manual C1043M-A (2/96) 21
6.0 HOT KEY SUMMARY LIST
[B] BLOCK SELECT
Used to select polling for a block of two (2) or four
(4) groups of registers.
[C][I] CLEAR COMMUNICATIONS
Clears Communication to PIMs and ICI3000P.
[E] EXCEPTION FOLLOW ON/OFF
The [E] key turns on the Exception Follow sequence
for Screen 1. When an exception occurs, the unit will
continue to monitor the POS terminal until an ex-
ception occurs on another terminal. When activated,
the following prompt will be displayed:
0000=EXF1>V S
If you wish to monitor a particular register while wait-
ing for an Exception to happen you can simulta-
neously use the [F1] Hot Ke y. With Exception Fol-
low, both screens are used to look for Exceptions.
Remember, Exceptions must be turned on in order
for the [E] key to work.
[G] GROUP SELECT
Toggle between register groups 1 and 2, or 1 and 4.
[L] EXCEPTION COLUMN LINE ON/OFF
Turns on a row of numbers called an Exception Col-
umn Line which is used for programming Excep-
tions. This feature is especially useful when attempt-
ing to program Column Specific Exceptions.
[R] MAIN REGISTER for exception follow.
[S] SEQUENCING ON/OFF
The [S] key works as a toggle switch, turning on
and off the “Sequencing” of the Inter-Check switcher.
You can still use the hot key combination [F9], [F9]
to manually select an item from the Shadow List.
Each time you press the [S] key, Inter-Check will
beep and display a prompt informing you of the cur-
rent settings.
[ESC] STANDBY MODE [ESC]
Puts the data in Standby mode and clears existing
data from the screen. This provides a clear view of
the video picture. [ENTER] returns to the monitor-
ing mode. This function clears the communication
lines and buffers.
[F1] REGISTER SELECT
This function allows a specific register to be moni-
tored continuously (see Section 4.1).
[F2] OPERATOR SELECT
This function allows a specific POS terminal opera-
tor to be continuously monitored (see Section 4.2).
[F3] EXCEPTIONS ON/OFF
This function turns on/of f the exception monitoring
(see Section 4.3).
[F4] EXTERNAL PRINTER ON/OFF
This function turns on/off the external printer and
prints the text currently displayed on the monitor.
After pressing [F4], press [1] or [2] to select the
screen to be printed. A “P” will appear on the status
line of the screen you have selected. Inter-Check will
prompt: “Printer On” or “Printer Off” for current
printer status. Pressing [F4] and the screen number
again will turn off the printer as indicated by the dis-
appearance of the “P”. The ICI3000P will only print
to the external printer for the last screen selected (see
Section 4.5).
[F5] PRINTER DUMP
This function is similar to the F4 function, except it
will print 40 lines of data previous to the current dis-
play . Printing will continue until turned off. This fea-
ture is used for capturing important information that
may have scrolled off the screen.
[F6] FREEZE FRAME
This will “freeze” all action on the screen, both video
and data text. Pressing [F6] again will “unfreeze”
text.
[F7] SMALL SCREEN/LARGE SCREEN
TOGGLE
Depressing this key will toggle your data screen dis-
play from Small Screen Text W indow parameters to
the Large Screen T ext W indow parameters. Remem-
ber, you can program the number of lines you want
displayed for Small and Large Screen (Lar ge screen
17 lines only.) (See Section 4.8.2 - 4.8.4).